Shenzhen Winlink Technology Co., Limited
Shenzhen Winlink Technology Co., Limited
Add to Cart
1xLC Mini 300m HD Video Extender 1310nm 1550nm Laser HDMI Plug
1xLC HDMI Fiber Extender 1310/1550nm Laser, 300m
Features:
*** Resolution up to 3840*2160/30Hz(Y:U:V 4:4:4);
*** Support resolution 3840*2160/30Hz(Y:U:V 4:2:0)
*** Extned the DVI data up to 300 meters over OM3 MMF or SMF Fiber;
*** Support HDCP;
*** Detachable feature with 1x LC OM3 MM Fiber or SM Fiber;
*** The modules are compact enough to directly plug to graphic sources and displays by adopting HDMI plugs;
*** Includes two (2) +5V DC power adapters for the transmitter and receiver ;
*** Micro USB-B power connector;
*** Data security with negligible RFI/EMI emissions and loss of video quality due to no copper conductor present ;
Applications:
*** Digital FPDs, PDPs and projectors for medical appliances, aero, traffic control, factory, and bank
*** Digital FPDs and projectors in conference room and auditorium
*** Kiosk with digital FPDs showing full motion graphic displays from remote systems
*** PDP displays for information in public sites
*** LED signboards in streets and in stadiums
Application diagram:
Products' picture:
Description:
WLHDMI-304S-TR optical extension module consists of transmitter module and receiver module, each of which has a LC connectors and a HDMI plug. Users could decide extension length at their discretion by choosing the length of fibre-optic cables with LC ferrules at the ends. It offers graphic TMDS signals to be extensible up to the limits of modal bandwidth of selected OM3 multi-mode glass fibers or Single-Mode fibers.
The communication between the WLHDMI-304S-T and WLHDMI-304S-R is bidirectional ,the data rate from the –T to –R is 10.2Gb/s with 1310nm, and from the –R to –T is 250Mb/s with1550nm, the 1310nm and 1550nm optical signals are multiplexed to one fiber with a 1310/1550nm WDM filter insider the HDMI extender.
The WLHDMI-304S HDMI Extender compliant HDMI 1.4 standard, It Support resolution is up to 3840*2016/30Hz (YUV 4:4:4) or 3840*2016/60Hz (YUV 4:2:0). It support distance up to 300m over OM3 MMF and SMF.
The Extenders are constituted of three parts as follows;
- One transmitter; P/N: WLHDMI-304S-T
- One receiver; P/N: WLHDMI-304S-R
- Two AC Adaptors to 110V-240V with DC 5V 1A outlet
Technical Specifications
- Specifications
- General Specifications
|
| Parameter | Specifications |
| Resolution | 4k*2k 30Hz | 3840x2160/30Hz (YUV 4:4:4) |
| 4k*2k 60Hz | 3840x2160/60Hz.(YUV 4:2:0) | |
| Components | Laser Diodes in Tx Module | 1310nm FP laser and 1550nm PIN PD |
| Photo Diodes in Rx Module | 1550nm FP laser and 1310nm PIN PD | |
| WDM filter | Integrated 1310nm/1550nm filter | |
| Electrical | Input and Output Signals | TMDS Level (complying with DVI1.0) |
| Data Transfer Rate (Graphic Data) | Max. 3.4Gbps | |
| Maximum Pixel Clock Frequency | 340Mb/s | |
| Maximum Video Bit Rate | 10.3Gb/s | |
| Total Jitter at the end of Rx output | Max. 309 ps | |
| Skew inter-channels | Max. 6ns | |
| Optical | Link Power Budget | Min 8.5dB |
| Mechanical | Module dimension (mm) | 59.5LX20.0WX10.5H |
| Connector | Optical Connector | 1X LC connector |
| Electric Connector | HDMI plug | |
| Recommended Fiber | OM3 MM Fiber or Single-mode Fiber | |
| Extend Distance | 300m | |
Absolute Maximum Ratings
| Parameter | Symbol | Minimum | Maximum | Units |
| Supply Voltage | VCC | - 0.3 | + 6.0 | V |
| Input and Output Voltage | Vin/out | - 0.3 | VCC | V |
| Operating Temperature | Top | 0 | 70 | °C |
| Operating Relative Humidity | RHop | 5 | 80* | %RH |
| Storage Temperature | Tsto | - 40 | + 85 | °C |
| Storage Relative Humidity | RHsto | 5 | 95* | %RH |
Operating Conditions
Transmitter module (E-to-O converter); P/N WLHDMI-302S-T
|
| Parameter | Symbol | Minimum | Typical | Maximum | Units |
| Power Supply | Supply Voltage | Vcc | 4.5 | 5.0 | 5.5 | V |
| Supply Current | ITcc | - | 280 | 320 | mA | |
| Power Dissipation | PRX | - | 1.4 | 1.76 | W | |
| Power Supply Rejection | PSR |
| 50 |
| mVp-p | |
| TMDS | Data Input Load | RLD |
| 50 |
| Ω |
| Graphic Supply Voltage | GVCC | + 3.1 | + 3.3 | + 3.5 | V | |
| Single-Ended Output Swing Voltage | GVISWING | 0.4 | - | 0.8 | V | |
| Optical Link | 10.2Gb/s transmitter | |||||
| Optical output Power | Po | -6.0 |
| 0 | dBm | |
| Data Rate | B |
| 10.3 |
| Gb/s | |
| Receiving Wavelength | λ | 1260 | 1310 | 1360 | nm | |
| ER | Er | 3.5 |
| 7 | dBm | |
| Δλ |
|
|
| 2 | nm | |
| 250Mb/s Receiver | ||||||
| Receiving Optical Power | Po | -25 |
| 0 | dBm | |
| Data Rate | B |
| 250 |
| Mb/s | |
| Receiving Wavelength | λ | 1490 | 1550 | 1610 | nm | |
| Signal Detect Good | SDg |
|
| -25 | dBm | |
| Signal Detect Fail | SDf | -27 |
|
| dBm | |
| Link Power Budget | Pbgt | 9.0 |
|
| dB | |
| Total Jitter | TRjitter |
|
| 309 | ps | |
Receiver module; P/N: WLHDMI-302S-R:
|
| Parameter | Symbol | Minimum | Typical | Maximum | Units |
| Power Supply | Supply Voltage | Vcc | 4.5 | 5.0 | 5.5 | V |
| Supply Current | IRcc | - | 280 | 320 | mA | |
| Power Dissipation | PRX | - | 1.4 | 1.76 | W | |
| Power Supply Rejection | PSR |
| 50 |
| mVp-p | |
| TMDS | Data Output Load | RLD |
| 50 |
| Ω |
| Graphic Supply Voltage | GVCC | + 3.1 | + 3.3 | + 3.5 | V | |
| Single-Ended Output Swing Voltage | GVISWING | 0.4 | - | 0.8 | V | |
| Optical Link | 10.2Gb/s Receiver | |||||
| Receiving Optical Power | Po | -14.5 |
| 0 | dBm | |
| Data Rate | B |
| 10.3 |
| Gb/s | |
| Receiving Wavelength | λ | 1260 | 1310 | 1360 | nm | |
| Signal Detect Good | SDg |
|
| -14 | dBm | |
| Signal Detect Fail | SDf | -15 |
|
| dBm | |
| Link Power Budget | Pbgt | 8.5 |
|
| dB | |
| Total Jitter | TRjitter |
|
| 309 | ps | |
| 250Mb/s Transmitter | ||||||
| Optical output Power | Po | -9.0 |
| -3 | dBm | |
| Data Rate | B |
| 250 |
| Mb/s | |
| Receiving Wavelength | λ | 1490 | 1550 | 1610 | nm | |
| ER | Er | 9 |
|
| dBm | |
| Δλ |
|
|
| 4 | nm | |
Recommended Specifications of Fibre-Optic Cables
| Parameters | Conditions | Specifications |
| Fiber Type |
| OM3 MM Fiber or SM Fiber |
| Fiber Cable Attenuation | SM Fiber λ = 1310nm | Max. 0.5dB/km |
| OM3 MM Fiber λ = 1310nm | Max. 3.5dB/km | |
| Extension Distance | SM Fiber | 300m |
| OM3 MM Fiber | 300 m | |
| Skew |
| Max. 0.4ns |
| Insertion Attenuation |
| Max. 0.5dB |
| Total Optical Attenuation | In 330 ft (100 meter) extension | Max. 1.5dB |
Note*: some plastic couplers to clamp two LC connectors could not fit in.
Drawing
Installation:
Note: Please install the optic HDMI extender according to the following step, if not, the extender
should be not working.
1. Connect the WLHDMI-304S-T to the Video source and connect the WLHDMI-304S-R to the
display;
2. Connect the Fiber between the WLHDMI-304S-T and WLHDMI-304S-R,
3. Connect the External Power Supply to WLHDMI-304S-T and WLHDMI-304S-R.
4．Apply the power to the system.